Since ancient times, the magnitude of male dignity has been concerned about stronger representations.It was confirmed that this was a discovery of the person who, according to historians, is at least 28,000 years old.It was discovered during archaeological excavations in Germany - a country considered a pioneer and leader in the porn industry.
Today, penis size can be changed in different ways - from using special medications, using ointments and creams, performing stretch massages, to surgical procedures.However, the nozzles of the reproductive organs can be purchased in an intimate relationship in toys and purchased with their own hands and become popular.
Can you make your own member nozzle?
The internet is full of “how to make artificial roosters with your own hands.”The increase in interest is briefly explained: the models presented in the store are of high quality and expensive, and the models with low prices do not differ in quality.To try a sex toy, a puzzle is born: is it necessary to pay for the goods without the confidence to use it further?
After all, it may prove that the girl will not approve the presence of the nozzle, otherwise she will cause her discomfort, irritation or pain (the latter is not excluded by the man).If you choose a more affordable option, toy or genital injury caused by cracked or exfoliated parts of the nozzle may be allergic, and therefore there is a risk of irritation.
It is also possible when you want to try "now and now", but don't have time to wait for orders from the internet and have no access to the nearest sex shop.In this case, the question of how to make a dildo or member nozzle at home is very important.
If you consider the product, it is obvious that it is very difficult to construct it, but not impossible.The most important thing is to have desire and a small amount of time, as well as to purchase necessary materials.On the latter, the final quality of the resulting object will depend on.The advantage of homemade members is that their shape and size will be limited only by the author's imagination.
Choose the right material
For nozzles and humans produced under industrial conditions, please use:
- Cybercro is a material that is almost similar to the real skin of a human.It is soft and delicate and is actually indistinguishable from biological meat because when it comes into contact with the body it quickly needs temperature and keeps it fixed to the organs throughout the time.The disadvantages of the material are very susceptible to damage and therefore require careful treatment, washed in warm soapy water, and stored in special cases.
- PVC is the most popular material in producing dildos and sex toys.Its advantages: The ability to quickly take human form, strength and ability to combine with lubricants.It is washed by PVC with soft detergent: soap, shower gel or intimate hygiene without special storage conditions.Any frequency and intensity can be applied.
- Silicone is a medical material used to produce intimate goods in 90% of cases.It is soft, flexible and very elastic.It is able to quickly take the shape of the body and then return to its original state after "working".Advantages: Hypoallergenic, allowing all toys to run at any strength.The silicone nozzle is stored in a dark place because under the influence of ultraviolet light, it is destroyed.Cons - The game requires processing lubrication and is only based on water.
- Rubber is a specialized material with increased thermoplastic properties and is comfortable to touch.Suitable for creating products that need to be provided and maintained.The softness of the material allows them to make them comfortable with both companions and elasticity - to obtain the necessary parameters (length, thickness, ribs, papules, etc.).The nozzles of the rubber members do not rub or cause allergic reactions.For care, use non-aggressive detergents or special detergents for private toys.
- Plastic is a dense material where special mixtures are added for more softness and elasticity.Used to make nozzles of special shapes.
The choice of materials is the most important stage in making a dildo with your own hands, as the final version of the product and its safety for both parties depends on this.Therefore, savings are very undesirable in this case.
Material Type
Before making a penis at home, you should clarify which material the manufacturer can use.Some of them are available on free sale at construction stores, while others can be ordered over the internet.
Therefore, they are suitable for making home-made gravity:
- Alginate molding quality;
- Silicone forming quality;
- Bending polyurethane mass.
Maybe there are other options available in the store, but before getting them, you should find out if the materials cause an allergic reaction and their safety to the body.
Working phase
How to make a dildo at home?Will need:
- Flexible transparent plastic;
- Tape (tape);
- Selected materials;
- Food movies.
Cut squares or rectangles from plastic sheets - depending on the size of the plan.The length of the sheet is adjusted at will - the longer the man wants to add to himself, the longer the time he spends.The width of the table depends on the existing parameters of the penis: in an upright state it should easily enter the interior and have free space.To make the homemade members fit in size, it should be:
- Measure with a centimeter ribbon;
- Add the appropriate amount of centimeters to the results;
- Cut off the required width.
Error: Wrap the plastic plate around the penis and cut off the "eyes" - the penis you made yourself is small or too large.
When finished with size and cutting, turn the tray with a tube and secure the edges tightly with tape.Cut a circle out of the plastic, which seals a hole and is also wrapped tightly with tape.The task is to make the received pipes completely tight.
The second phase of the “How to Make a Dildo” process is pouring out.To do this, the erect penis is tightly wrapped in a protective film to eliminate the contact between mass and the body.If the task is to make a smooth nozzle, it needs to be carefully packaged, not including all possible violations, as the smoothness inside the nozzle will depend on this in the future.
Next, pour the molded mass into the prepared tube and lower the penis.The curing process lasts on average for 15 minutes, and then the structure is removed from the penis.Now you can carefully remove the tape and release the product from the plastic frame - a home penis that can be used.
If this guy wants to provide anatomical shape for the toy, it can be done with a knife and abrasive material.They are easy to make various ledges, ribs, antennas and other nozzle "chips".
risk
Before you make a member with your own hands with improvised materials, you need to consider the serious health risks inherent in homemade sex toys:
- Seals, sharp or poorly processed edges, corners, protrusions and other defects in household toys can inspire damage to both parties;
- Miscalculated size threatens the loss of nozzles during intimacy; a more serious option - it may fall into a woman's body;
- If the calculation is in an incomplete erectile state, or is lost when the quality is solidified, it is possible that the nozzle removal may be ineffective without medical services;
- Violation of tightness when wrapping members with movies can lead to urethral populations, which can cause inflammatory processes or obstruction of the urethra.
- Keeping members for 15 minutes in a fully erect state is a difficult task, with severe side effects on internal organs for men taking drugs with phosphatase inhibitors.
After evaluating and weighing all possible risks, they are suitable for the independent production of dildos and nozzles responsibly and carefully and are carried out carefully and accurately at all stages.
What is the creation of artificial penis from it
Making a balcony symbol directly at home is easier to create a member.For ladies, this toy is desirable and it is free to own if the girl wants.For dumpling production, they are suitable:
Gypsum mixture
It is sold freely in construction supermarkets, pharmacies or children's toy stores.After preparing the quality (the rules for using gypsum are described in the instructions for embedding in the package), the members of the required size are covered, allowing for complete drying.After sanding with sandpaper to eliminate all bumps.Before the love game, the condom is placed on the penis.
The nozzle can also be produced using a plastic gypsum mixture: for this purpose, members that are fully erected and wrapped in the film are covered with the gypsum mixture and made hard.However, such toys will be very stiff and this characteristic can cause discomfort, pain and inconvenience.Its second disadvantage is its vulnerability.
Silicone mixture
Another option to fill it is to shape it from the previous vibrator.That is, if you have purchased a toy (or a package that you accidentally receive from a friend), you can pour the silicone mass into the plastic shape, previously extracting vegetable oil for free at the end of the work and sticking half behind after puncture.
GLUE is able to cause the most intense allergies, so it is recommended to use rubber products No. 2 for such human-causing games.
wax
The material can be used in 90% of cases and anywhere, and it has advantages:
- It is easy to take the desired shape;
- Characteristic aroma;
- In the absence of allergic beekeeping blows, women can be introduced into the body without condoms (which is enough to treat them with oil).
The wax candle is heated, if needed, its length and width are additionally irritating to the ledges, spikes, ribs, etc.
plastic
This product for children’s creativity can be used as wax, but it is worth considering that it is more plastic and therefore it can easily lose its shape during sexual contact.A simple pencil is able to make a more stable toy that is placed in fuzzy artificial components or to initially freeze the penis.
Improvisational means
You can make nozzles for your penis yourself, but the process is not fast.If the desire to experiment suddenly appears and there are no special toys, you can use improvisation.How to change members?
- Vegetables and fruits.In almost every refrigerator, there are natural gifts with the shape of a penis symbol.Ideal and affordable options - Cucumbers and Bananas, bringing their passion into intimate games in refrigerated format.
- cell phone.We're talking about small models that can vibrate.
- Electric shaver.Cutting blocks were removed from her earlier.
This alternative will be used as a comb, curly, curly curly, and other things with a penis shape without sharp corners and protrusions.The main conditions for its application: rinse in water and wear condoms.
It is required to lie in bed with nozzles, people and lubricants to make the daily life of couples diversity and acuity.But it is worth coordinating this issue with the lover before replacing the member with a man-made copy, otherwise the romantic evening could end regretfully: a serious quarrel or a painful break.